Table 1 When the safety factor is greater than or equal to 1, the unit structure can withstand the maximum positive pressure (accurate to 0.5Â N)
From: Design and analysis of three-dimensional printing of a porous titanium scaffold
Positive pressure (Unit: N) | 400 μm | 600 μm | 800 μm |
|---|---|---|---|
Imitation diamond-60° | 10.5 | 8.0 | 6.0 |
Imitation diamond-90° | 8.0 | 8.5 | 7.0 |
Imitation diamond-120° | 11.0 | 9.0 | 7.5 |
Regular tetrahedron | 88.5 | 92.0 | 93.0 |
Regular hexahedron | 185.0 | 165.0 | 155.0 |