Skip to main content
Fig. 1 | BMC Musculoskeletal Disorders

Fig. 1

From: Effects of modified trans-tibial versus trans-portal technique on stress patterns around the femoral tunnel in anatomical single-bundle ACL reconstruction with different knee flexion angles using finite element analysis

Fig. 1

Computational simulation of femoral tunnel drilling. The femoral tunnel of 10 mm diameter was created in 135° flexion model from the low far anteromedial portal which was previously marked with a coin during CT scanning (TP group, A). The same knee models were then drilled through the modified TT technique (modified TT group, B) with the same diameter at 90° of flexion separately. TP: trans-portal, TT: trans-tibial

Back to article page

BMC Musculoskeletal Disorders

ISSN: 1471-2474

Contact us