Skip to main content
Fig. 2 | BMC Musculoskeletal Disorders

Fig. 2

From: Three-dimensional printing of patient-specific plates for the treatment of acetabular fractures involving quadrilateral plate disruption

Fig. 2

Fixation simulation on the 3D-printed acetabular model. a 3DPPS plate model; b 3D-printed acetabular model; c Match test of the 3DPPS plate and the 3D-printed acetabular model; d Simulation of all 3.5 mm screw insertions (blue arrow); e Simulation of 6.5 mm lag screw insertion (red arrow); f Fixation with the 3DPPS plate after insertion of all screws

Back to article page

BMC Musculoskeletal Disorders

ISSN: 1471-2474

Contact us