Skip to main content
Fig. 1 | BMC Musculoskeletal Disorders

Fig. 1

From: Using External Joint Stabilizer – Elbow (EJS-E) for treating elbow instability—biomechanical assessment and clinical outcomes

Fig. 1

The two different joint stabilizing devices. A The external joint stabilizer—elbow. The axis pin can be inserted through the gliding hole of the 3.5-mm cannulated screw. The cannulated screw is used to prevent toggling effect of the axis pin in the bony channel. Additionally, this device has multiple screw holes at the plate body which benefits surgical flexibility for bony anatomy. B The Steinmann pin was shaped as a hook and can be attached to the bone by two cortex screws

Back to article page