Skip to main content
Fig. 4 | BMC Musculoskeletal Disorders

Fig. 4

From: Biomechanical analysis of different osteosyntheses and the combination with bone substitute in tibial head depression fractures

Fig. 4

Maximum Load in Load-to-Failure tests. A significantly lower maximum load was determined for the 2 screw osteosynthesis (Group 1) compared to the 4 screw osteosynthesis (Group 2) and the lateral angle stable L-buttress plate (Group 3) (Group 1, 2 [p = 0.02]; group 1, 3 [p < 0.01]). An asterisk indicates a significant between-group difference (p < 0.05)

Back to article page

BMC Musculoskeletal Disorders

ISSN: 1471-2474

Contact us