TY - JOUR AU - Zdero, R. AU - Rose, S. AU - Schemitsch, E. H. AU - Papini, M. PY - 2007 DA - 2007// TI - Cortical screw pullout strength and effective shear stress in synthetic third generation composite femurs JO - J Biomech Eng VL - 129 ID - Zdero2007 ER - TY - JOUR AU - Ansell, R. H. AU - Scales, J. T. PY - 1986 DA - 1986// TI - A study of some factors which affect the strength of screws and their insertion and holding power in bone JO - J Biomech VL - 1 UR - https://doi.org/10.1016/0021-9290(68)90023-7 DO - 10.1016/0021-9290(68)90023-7 ID - Ansell1986 ER - TY - JOUR AU - Asnis, S. E. AU - Ernberg, J. J. AU - Bostrom, M. P. AU - Wright, T. M. AU - Harrington, R. M. AU - Tencer, A. F. AU - Peterson, M. PY - 1996 DA - 1996// TI - Cancellous bone screw thread design and holding power JO - J Orthop Trauma VL - 10 UR - https://doi.org/10.1097/00005131-199610000-00003 DO - 10.1097/00005131-199610000-00003 ID - Asnis1996 ER - TY - JOUR AU - Chapman, J. R. AU - Harrington, R. M. AU - Lee, K. M. AU - Anderson, P. A. AU - Tencer, A. F. AU - Kowalski, D. PY - 1996 DA - 1996// TI - Factors affecting the pullout strength of cancellous bone screws JO - J Biomech Eng VL - 118 UR - https://doi.org/10.1115/1.2796022 DO - 10.1115/1.2796022 ID - Chapman1996 ER - TY - JOUR AU - Steeves, M. AU - Stone, C. AU - Mogaard, J. AU - Byrne, S. PY - 2005 DA - 2005// TI - How pilot-hole size affects bone-screw pullout strength in human cadaveric cancellous bone JO - Canad J Surg VL - 48 ID - Steeves2005 ER - TY - JOUR AU - Cleek, T. M. AU - Reynolds, K. J. AU - Hearn, T. C. PY - 2007 DA - 2007// TI - Effect of screw torque level on cortical bone pullout strength JO - J Orthop Trauma VL - 21 UR - https://doi.org/10.1097/BOT.0b013e318030261e DO - 10.1097/BOT.0b013e318030261e ID - Cleek2007 ER - TY - JOUR AU - Firoozbakhsh, K. K. AU - DeCoster, T. A. AU - Moneim, M. S. PY - 1994 DA - 1994// TI - Effect of cyclical loading on the holding power of surgical screws JO - Orthopedics VL - 17 ID - Firoozbakhsh1994 ER - TY - JOUR AU - Gausepohl, T. AU - Mohring, R. AU - Pennig, D. AU - Koebke, J. PY - 2001 DA - 2001// TI - Fine thread versus coarse thread. A comparison of the maximum holding power JO - Injury VL - 32 UR - https://doi.org/10.1016/S0020-1383(01)00168-1 DO - 10.1016/S0020-1383(01)00168-1 ID - Gausepohl2001 ER - TY - JOUR AU - Heidemann, W. AU - Gerlach, K. L. AU - Gröbel, K. H. AU - Köllner, H. G. PY - 1998 DA - 1998// TI - Influence of different pilot hole sizes on torque measurements and pullout analysis of osteosynthesis screws JO - J CranioMaxilloFac Surg VL - 26 UR - https://doi.org/10.1016/S1010-5182(98)80035-8 DO - 10.1016/S1010-5182(98)80035-8 ID - Heidemann1998 ER - TY - JOUR AU - Zhang, Q. H. AU - Tan, S. H. AU - Chou, S. M. PY - 2006 DA - 2006// TI - Effects of bone materials on the screw pull-out strength in human spine JO - Med Eng Phy VL - 28 UR - https://doi.org/10.1016/j.medengphy.2005.11.009 DO - 10.1016/j.medengphy.2005.11.009 ID - Zhang2006 ER - TY - JOUR AU - Lin, J. AU - Hou, S. M. PY - 2002 DA - 2002// TI - Bending strength and holding power of a prototype tibial locking screw JO - Clin Orthop VL - 403 UR - https://doi.org/10.1097/00003086-200210000-00034 DO - 10.1097/00003086-200210000-00034 ID - Lin2002 ER - TY - JOUR AU - Murphy, T. P. AU - Hill, C. M. AU - Kapatkin, A. S. AU - Radin, A. AU - Shofer, F. S. AU - Smith, G. K. PY - 2001 DA - 2001// TI - Pullout properties of 3.5-mm AO/ASIF self-tapping and cortex screws in a uniform synthetic material and in canine bone JO - Vet Surg VL - 30 UR - https://doi.org/10.1053/jvet.2001.23344 DO - 10.1053/jvet.2001.23344 ID - Murphy2001 ER - TY - JOUR AU - Carmouche, J. J. AU - Molinari, R. W. AU - Gerlinger, T. AU - Devine, J. AU - Patience, T. PY - 2005 DA - 2005// TI - Effects of pilot hole preparation technique on pedicle screw fixation in different regions of the osteoporotic thoracic and lumbar spine JO - J Neurosurg Spine VL - 3 UR - https://doi.org/10.3171/spi.2005.3.5.0364 DO - 10.3171/spi.2005.3.5.0364 ID - Carmouche2005 ER - TY - JOUR AU - Okuyama, K. AU - Abe, E. AU - Suzuki, T. AU - Tamura, Y. AU - Chiba, M. AU - Sato, K. PY - 2000 DA - 2000// TI - Can insertional torque predict screw loosening and related failures? An in vivo study of pedicle screw fixation augmenting posterior lumbar interbody fusion JO - Spine VL - 25 UR - https://doi.org/10.1097/00007632-200004010-00015 DO - 10.1097/00007632-200004010-00015 ID - Okuyama2000 ER - TY - JOUR AU - Thompson, J. D. AU - Benjamin, J. B. AU - Szivek, J. A. PY - 1997 DA - 1997// TI - Pullout strengths of cannulated and noncannulated cancellous bone screws JO - Clin Orthop VL - 341 UR - https://doi.org/10.1097/00003086-199708000-00035 DO - 10.1097/00003086-199708000-00035 ID - Thompson1997 ER - TY - JOUR AU - Van, L. P. AU - Peter, B. AU - Beluze, L. AU - Lemaître, J. PY - 1999 DA - 1999// TI - Reinforcement of osteosynthesis screws with brushite cement JO - Bone VL - 25 UR - https://doi.org/10.1016/S8756-3282(99)00142-8 DO - 10.1016/S8756-3282(99)00142-8 ID - Van1999 ER - TY - JOUR AU - Brown, G. A. AU - McCarthy, T. AU - Bourgeault, C. A. AU - Callahan, D. J. PY - 2000 DA - 2000// TI - Mechanical performance of standard and cannulated 4.0-mm cancellous bone screws JO - J Orthop Res VL - 18 UR - https://doi.org/10.1002/jor.1100180220 DO - 10.1002/jor.1100180220 ID - Brown2000 ER - TY - STD TI - American Society for Testing Materials, Standard F1691–96:Standard Test Method for Determining Axial Pull-Out Strength of Metallic Bone Screws. Philadelphia, PA, USA. ID - ref18 ER - TY - STD TI - American Society for Testing Materials, Standard F1839–08:Rigid Polyurethane Foam for Use as a Standard Material for Testing Orthopaedic Devices and Instruments. Philadelphia, PA, USA. ID - ref19 ER - TY - JOUR AU - Hsu, C. C. AU - Chao, C. K. AU - Wang, J. L. AU - Hou, S. M. AU - Tsai, Y. T. AU - Lin, J. PY - 2005 DA - 2005// TI - Increase of pullout strength of spinal pedicle screws with conical core: biomechanical tests and finite element analyses JO - J Orthop Res VL - 23 UR - https://doi.org/10.1016/j.orthres.2004.11.002 DO - 10.1016/j.orthres.2004.11.002 ID - Hsu2005 ER - TY - JOUR AU - Yuan, H. A. AU - Oarfin, S. R. AU - Dickman, C. A. AU - Merdjetko, S. M. PY - 1994 DA - 1994// TI - A historical cohort study of pedicle screw fixation in thoracic, lumbar, and sacral spinal fusions JO - Spine VL - 19 UR - https://doi.org/10.1097/00007632-199410151-00005 DO - 10.1097/00007632-199410151-00005 ID - Yuan1994 ER - TY - JOUR AU - Ohlin, A. AU - Karlsson, M. AU - Duppe, H. AU - Hasserius, R. AU - Redlund-Johnell, I. PY - 1994 DA - 1994// TI - Complications after transpedicular stabilization of the spine. A survivorship analysis of 163 cases JO - Spine VL - 19 UR - https://doi.org/10.1097/00007632-199412150-00007 DO - 10.1097/00007632-199412150-00007 ID - Ohlin1994 ER - TY - JOUR AU - Ono, A. AU - Brown, M. D. AU - Latta, L. L. AU - Milne, E. L. AU - Holmes, D. C. PY - 2001 DA - 2001// TI - Triangulated pedicle screw construct technique and pull-out strength of conical and cylindrical screws JO - J Spinal Disord VL - 14 UR - https://doi.org/10.1097/00002517-200108000-00007 DO - 10.1097/00002517-200108000-00007 ID - Ono2001 ER - TY - JOUR AU - Reitman, C. A. AU - Nguyen, L. AU - Fogel, G. R. PY - 2004 DA - 2004// TI - Biomechanical evaluation of relationship of screw pullout strength, insertional torque, and bone mineral density in the cervical spine JO - J Spinal Disord Tech VL - 17 UR - https://doi.org/10.1097/01.bsd.0000090575.08296.9d DO - 10.1097/01.bsd.0000090575.08296.9d ID - Reitman2004 ER - TY - JOUR AU - Chao, C. K. AU - Hsu, C. C. AU - Wang, J. L. AU - Lin, J. PY - 2007 DA - 2007// TI - Increasing bending strength of tibial locking screws: mechanical tests and finite element analyses JO - Clin Biomech VL - 22 UR - https://doi.org/10.1016/j.clinbiomech.2006.07.007 DO - 10.1016/j.clinbiomech.2006.07.007 ID - Chao2007 ER - TY - JOUR AU - Chao, C. K. AU - Hsu, C. C. AU - Wang, J. L. AU - Lin, J. PY - 2008 DA - 2008// TI - Increasing bending strength and pullout strength in conical pedicle screws: biomechanical tests and finite element analyses JO - J Spinal Disord Tech VL - 21 UR - https://doi.org/10.1097/BSD.0b013e318073cc4b DO - 10.1097/BSD.0b013e318073cc4b ID - Chao2008 ER - TY - JOUR AU - Yerby, S. AU - Scott, C. C. AU - Evans, N. J. AU - Messing, K. L. AU - Carter, D. R. PY - 2001 DA - 2001// TI - Effect of cutting flute design on cortical bone screw insertion torque and pullout strength JO - J Orthop Trauma VL - 15 UR - https://doi.org/10.1097/00005131-200103000-00012 DO - 10.1097/00005131-200103000-00012 ID - Yerby2001 ER - TY - JOUR AU - Abshire, B. B. AU - McLain, R. F. AU - Valdevit, A. AU - Kambic, H. E. PY - 2001 DA - 2001// TI - Characteristics of pullout strength failure in conical and cylindrical pedicle screws after full insertion and back-out JO - The Spine J VL - 1 UR - https://doi.org/10.1016/S1529-9430(01)00119-X DO - 10.1016/S1529-9430(01)00119-X ID - Abshire2001 ER - TY - STD TI - The pre-publication history for this paper can be accessed here:http://www.biomedcentral.com/1471-2474/10/44/prepub UR - http://www.biomedcentral.com/1471-2474/10/44/prepub ID - ref29 ER -